请教大神，熊猫侦测卡嗅探时，门禁无反应的问题

bruceliu

手上有一个“熊猫侦测卡GP二代”的设备，用PCR532软件检测卡片类型为CPU卡：

1. **********开始检测卡片**********
   
2. The custom key 0xffffffffffff has been added to the default keys
   
3. The custom key 0x5d736554dd76 has been added to the default keys
   
4. The custom key 0xced0cfc1bbbf has been added to the default keys
   
5. The custom key 0x5554aaa96321 has been added to the default keys
   
6. The custom key 0xa0a1a2a3a4a5 has been added to the default keys
   
7. The custom key 0x010203040506 has been added to the default keys
   
8. The custom key 0x777704d37d23 has been added to the default keys
   
9. Found Mifare Classic 1k tag
   
10. Uid :FA5819E3
    
11. ISO/IEC 14443A (106 kbps) target:
    
12.     ATQA (SENS_RES): 00  08  
    
13. * UID size: single
    
14. * bit frame anticollision supported
    
15.        UID (NFCID1): fa  58  19  e3  
    
16.       SAK (SEL_RES): 20  
    
17. * Compliant with ISO/IEC 14443-4
    
18. * Not compliant with ISO/IEC 18092
    
19.                 ATS: 78  80  90  02  20  90  00  00  00  00  00  fa  58  19  e3  
    
20. * Max Frame Size accepted by PICC: 256 bytes
    
21. * Bit Rate Capability:
    
22.   * Same bitrate in both directions mandatory
    
23. * Frame Waiting Time: 154.7 ms
    
24. * No Start-up Frame Guard Time required
    
25. * Node Address not supported
    
26. * Card IDentifier supported
    
27. * Historical bytes Tk: 20  90  00  00  00  00  00  fa  58  19  e3  
    
28.   * Proprietary format
    
29. 
    
30. Fingerprinting based on MIFARE type Identification Procedure:
    
31. Other possible matches based on ATQA & SAK values:
    
32. * Fudan FM1208
    
33. 该卡为CPU卡，暂时无法读取
    
34. 
    
35. ##运行完毕##

复制代码

买了一个锤子CPU基础版，读出了目录，但二进制文件解不出来，想用熊猫读卡器去嗅探一下密码，但选择了“侦测1K”和读取“卡号”后，把读卡器放到门禁读头上没任何反应。请问大神，是因为读卡器不支持CPU卡的读头设备吗？哪种读卡器能支持呢？
（嗅探功能之前在其他非CPU门禁上用过，嗅探出过密码）

[img][/img]